Construction Dust Monitoring in Bolton
Real-time PM&sub10; / PM&sub2;.&sub5; boundary monitoring, Frisbee deposited dust gauges and Trigger Action Plans for Bolton construction and demolition sites. IAQM 2024 framework; designed to discharge Bolton Council planning conditions. Chartered consultants covering Greater Manchester.
Construction dust monitoring for Bolton sites
Bolton's construction pipeline includes the town centre regeneration, Trinity Quarter, residential development across the borough and continued industrial site redevelopment.
We provide real-time PM10 monitoring for Bolton construction sites with TAPs designed to match Bolton Council's discharge expectations within the GM CEMP framework.
Air Dust Odour designs, installs and operates real-time PM&sub10; boundary monitoring schemes across Greater Manchester, with monthly compliance reports written to discharge Bolton Council dust conditions. Schemes are designed and signed off by Malcolm Pounder CEnv MIAQM, a Chartered Environmentalist and Full Member of the Institute of Air Quality Management.
Our Bolton Construction Dust Monitoring Services
IAQM 2024 framework throughout, MCERTS-grade instruments and reports written to discharge Bolton Council conditions.
Real-Time PM&sub10; / PM&sub2;.&sub5; Boundary Monitoring
MCERTS-grade real-time particulate monitors with telemetry, deployed at the Bolton site boundary nearest sensitive receptors. Live 1-minute and 15-minute averages, automatic exceedance alerts, monthly compliance reports against the IAQM and TAP thresholds.
Deposited Dust Gauges (Frisbee / Bergerhoff)
Frisbee gauges per BS 1747-1 / Vaughan & Hall and (where the council specifies them) Bergerhoff gauges per VDI 2119, read weekly or monthly at the agreed Bolton sensitive receptor locations and analysed gravimetrically against the IAQM 200 mg/m²/day threshold.
Trigger Action Plan & CEMP Support
We draft the Trigger Action Plan and the CEMP dust section to match the planning condition wording, agree it with Bolton Council, and provide the monitoring backup to discharge the condition.
Demolition-Phase Intensive Monitoring
Higher-density monitoring schemes for Bolton demolition projects — typically 6 to 12 weeks of weekly or fortnightly reporting alongside the real-time PM data, because demolition is the highest-dust phase of most projects.
Bolton & Surrounding Areas
We cover Bolton and the wider Greater Manchester, with no per-mile travel surcharges.
Frequently Asked Questions
When does a Bolton construction project need real-time dust monitoring?
Most Bolton construction projects classified as Medium or High Risk under the IAQM 2014/2024 dust framework end up with a planning condition or Section 106 obligation that requires real-time PM10 boundary monitoring and deposited dust gauges throughout the demolition, earthworks and construction phases. Typical triggers in Bolton include residential schemes of 50+ dwellings, commercial schemes of 10,000+ m², any works close to the Greater Manchester AQMA, and any major demolition. Bolton Council operates within the GM combined authority CEMP framework.
What does Bolton Bolton Council typically require?
Bolton Council typically requires the DMP / CEMP dust chapter discharged as a pre-commencement condition. The standard package is a written Dust Management Plan (DMP) or CEMP, a Trigger Action Plan with numerical action levels for PM10 (typically 190 µg/m³ investigation, 250 µg/m³ action, 500 µg/m³ stop-works on a 15-minute rolling average), at least one MCERTS-grade real-time PM10 monitor at the boundary nearest sensitive receptors, deposited dust gauges (Frisbee per Vaughan & Hall) at named sensitive receptor locations, and monthly compliance reports submitted to the council.
What sensitive receptors matter most in Bolton?
Sensitive receptors in Bolton include residential areas across the town centre, Horwich, Westhoughton and Farnworth, Royal Bolton Hospital, the University of Bolton and schools across the borough.
How quickly can you install a Bolton monitoring scheme?
From a confirmed instruction we can usually install a Bolton monitoring scheme within 10 to 15 working days — faster where a planning deadline or HSE Improvement Notice requires it. The Trigger Action Plan and discharge package are typically drafted in parallel with the procurement and can be submitted to Bolton Council as soon as the scheme is live.
How much does construction dust monitoring cost in Bolton?
A typical 12-month single-location real-time PM10 monitoring scheme in Bolton (one MCERTS-grade monitor with met sensor, telemetry, monthly reporting and 24/7 alert handling) starts from around £6,000 to £9,000 plus VAT for the year. A two-location scheme with weekly deposited dust gauge readings adds approximately £4,000 to £6,000 per year. Short-term demolition-phase monitoring (typically 6 to 12 weeks) starts from around £2,500 to £4,500. Travel within Greater Manchester is included in the quoted fee. See our cost guide for related pricing.