Workplace Dust Monitoring in Bradford
UKAS-accredited COSHH air sampling for Bradford workplaces. Personal IOM-head inhalable and cyclone respirable methods, analysed at a UKAS-accredited laboratory. Chartered consultants covering West Yorkshire.
COSHH dust monitoring for Bradford employers
Bradford's industrial economy spans engineering, textiles, food manufacturing (Morrisons head office and a major supply-chain footprint), chemicals and joinery. The city retains one of the densest concentrations of mid-tier manufacturing employers in West Yorkshire.
We carry out personal IOM-head and cyclone sampling across Bradford and the wider district, with particular experience in the food, joinery and metal-fabrication sectors.
At Air Dust Odour we carry out personal breathing-zone sampling and fixed static monitoring across West Yorkshire. Filters are sent to a UKAS-accredited laboratory and every result is compared to the relevant Workplace Exposure Limit in HSE document EH40. Surveys are planned and signed off by Malcolm Pounder CEnv MIAQM, a Chartered Environmentalist with two decades of hands-on air-quality experience.
Our Bradford Dust Monitoring Services
Every survey uses the correct sampling head per HSE methodology and is analysed by a UKAS-accredited laboratory.
Wood Dust Monitoring (IOM head)
Personal sampling of hardwood and softwood dust at Bradford joineries, sawmills, kitchen-fitter workshops and on-site carpentry. WEL 3 mg/m³ 8-hr TWA — one of the lowest dust limits in EH40 and frequently exceeded.
Inhalable & Respirable Dust
IOM-head inhalable and Higgins-Dewell cyclone respirable sampling for the general WELs (10 and 4 mg/m³). Routinely used at Bradford engineering workshops, joineries, food manufacturers and textile operations.
Respirable Crystalline Silica
Cyclone sampling per MDHS 101 with UKAS-accredited XRD analysis. WEL 0.1 mg/m³ — critical for Bradford stonemasons, engineered-quartz worktop fabricators, concrete cutters and quarrying operations.
Flour, Grain & Food Dusts
Inhalable food dusts including flour (WEL 10 mg/m³) and grain (WEL 10 mg/m³). Important for Bradford bakeries, food manufacturers, animal-feed mills and grain stores.
Gas & Indoor Air Quality (CO, CO&sub2;, VOCs)
Direct-reading multi-gas monitoring for Bradford offices, schools, plant rooms, underground car parks, confined space and construction sites. Calibrated electrochemical, NDIR and PID sensors for carbon monoxide, carbon dioxide, total VOCs, NO&sub2;, H&sub2;S, O&sub2; and LEL against EH40 WELs and BREEAM Hea 02 benchmarks.
Bradford & Surrounding Areas
We cover Bradford and the wider West Yorkshire, with no per-mile travel surcharges.
Frequently Asked Questions
Do I need workplace exposure monitoring in Bradford?
If your Bradford site generates dust, fume or vapour from processes such as engineering, textile manufacturing, food production, joinery or metal fabrication, you have a legal duty under COSHH Regulation 10 to assess and control worker exposure. Where there is no obviously low-risk exposure, monitoring with personal sampling pumps is normally the only defensible way to demonstrate compliance with the relevant Workplace Exposure Limit in HSE document EH40. Bradford sits within HSE Yorkshire and Humber HSE jurisdiction, and inspectors increasingly expect to see recent, UKAS-analysed personal sampling data on file.
Which industries in Bradford most commonly need dust monitoring?
Bradford retains a strong industrial base — engineering and fabrication, the textile legacy across the city, food manufacturing (Morrisons HQ and supply chain), joineries and the long-standing chemical sector. Wood dust in joineries, flour and food dusts in the bakery sector, welding fume in metal fabrication, cotton dust in remaining textile operations and respirable crystalline silica in stone-cutting are all routinely monitored.
How much does a workplace dust survey cost in Bradford?
A typical baseline survey for Bradford covering 4 to 8 workers with personal IOM-head sampling starts from around £750 to £1,200 plus VAT, with UKAS laboratory analysis at a UKAS-accredited laboratory charged at £35 to £85 per filter depending on the analyte. Travel from our base is included in the quoted fee — no per-mile surprises. See our cost breakdown page for worked examples across different industries and survey sizes.
How quickly can you survey a Bradford site?
For most Bradford sites we can usually be on site within 2 to 3 weeks of a confirmed booking, with sampling carried out over a full representative shift. Filters are dispatched same-day to a UKAS-accredited laboratory; results typically take 5 to 10 working days, and the written report follows within a further week. Where HSE has issued an Improvement Notice we can usually expedite the visit.
Do you cover Bradford for COSHH wood dust and silica monitoring specifically?
Yes. Wood dust (hardwood and softwood, WEL 3 mg/m³ inhalable) and respirable crystalline silica (WEL 0.1 mg/m³) are two of the most commonly monitored substances on Bradford sites — particularly in joineries, kitchen-fitter workshops, stone masonries, engineered-quartz worktop fabricators, and any construction or demolition site cutting concrete or brick. We carry both IOM heads and Higgins-Dewell cyclones on every visit and can combine the two sampling regimes on the same shift.