Workplace Dust Monitoring in the North West

COSHH air sampling for North West workplaces. Personal IOM-head inhalable and cyclone respirable methods, analysed at a UKAS-accredited laboratory. Chartered Environmentalist covering the North West.

COSHH dust monitoring for North West employers

The North West has a broad industrial and construction economy. Every workplace generating airborne dust has a duty under COSHH Regulation 10 to measure worker exposure to airborne hazardous substances where the risk assessment shows it is needed, and to compare the result to the Workplace Exposure Limits in HSE document EH40.

HSE North West regularly inspects joineries, food premises and metal fabrication workshops across the North West. We provide personal IOM-head inhalable and cyclone respirable sampling, analysed at a UKAS-accredited laboratory, for North West employers, plus direct-reading gas monitoring where relevant.

At Air Dust Odour we carry out personal breathing-zone sampling and fixed static monitoring across the North West. Filters are sent to a UKAS-accredited laboratory and every result is compared to the relevant Workplace Exposure Limit in HSE document EH40. Surveys are planned and signed off by Malcolm Pounder CEnv MIAQM, a Chartered Environmentalist with over a decade of hands-on air-quality experience.

Our Dust Monitoring Services in the North West

Every survey uses the correct sampling head per HSE methodology and is analysed by a UKAS-accredited laboratory.

Wood Dust Monitoring (IOM head)

Personal sampling of hardwood and softwood dust at North West joineries, sawmills, kitchen-fitter workshops and on-site carpentry. WEL 3 mg/m³ 8-hr TWA for hardwood dust, which also applies to all wood dust where hardwood and softwood are mixed, and 5 mg/m³ for softwood dust. The hardwood limit is one of the lowest dust limits in EH40 and frequently exceeded.

Inhalable & Respirable Dust

IOM-head inhalable and Higgins-Dewell cyclone respirable sampling for the general dust limits (10 and 4 mg/m³). Routinely used at North West engineering workshops, joineries, food manufacturers and construction sites.

Respirable Crystalline Silica

Cyclone sampling per MDHS 101 with UKAS-accredited XRD analysis. WEL 0.1 mg/m³ — critical for North West stonemasons, engineered-quartz worktop fabricators, concrete cutters and quarrying operations.

Flour, Grain & Food Dusts

Inhalable food dusts including flour (WEL 10 mg/m³) and grain (WEL 10 mg/m³). Important for North West bakeries, food manufacturers, animal-feed mills and grain stores.

Gas & Indoor Air Quality (CO, CO2, VOCs)

Direct-reading multi-gas monitoring for North West offices, schools, plant rooms, underground car parks and construction sites. Calibrated electrochemical, NDIR and PID sensors for carbon monoxide, carbon dioxide, total VOCs, NO2, H2S, O2 and LEL against EH40 WELs and BREEAM Hea 02 benchmarks.

The North West & Surrounding Areas

We cover the whole of the North West, with no per-mile travel surcharges.

Town centres across the North West Construction and workplace dust monitoring across central parts of the North West.
The North West industrial estates Engineering, fabrication and warehousing sites across the North West.
The North West residential areas Construction monitoring near sensitive residential receptors.
The North West business parks Office, light industrial and supply-chain workplaces.
The North West suburbs Joineries, kitchen-fitter workshops and light industrial sites.
The North West construction sites IAQM Medium/High Risk schemes with planning-condition monitoring.
The North West demolition projects Intensive demolition-phase monitoring across the area.
The North West surrounding villages Workplace and construction dust monitoring across the North West.

Frequently Asked Questions

Do I need workplace exposure monitoring in the North West?

If your North West site generates dust, fume or vapour from processes such as engineering, joinery, food production, construction or stone and concrete cutting, you have a legal duty under COSHH to assess and control worker exposure. Where there is no obviously low-risk exposure, monitoring with personal sampling pumps is the usual way to check compliance with the relevant Workplace Exposure Limit in HSE document EH40.

Which industries in the North West most commonly need dust monitoring?

The North West's economy spans engineering, the port economy (Liverpool), chemicals (Cheshire), food production, joinery and construction across Greater Manchester, Merseyside, Lancashire, Cheshire and Cumbria. The most commonly monitored substances are wood dust in joineries (WEL 3 mg/m³ for hardwood and mixed wood dust), respirable crystalline silica in stonework and concrete cutting (WEL 0.1 mg/m³), inhalable mixed dust in light manufacturing, and welding fume in metal fabrication (classified by IARC as a Group 1 carcinogen in 2017, with HSE enforcement expectations strengthened in 2019).

How much does a workplace dust survey cost in the North West?

Each survey is quoted as a fixed fee after a short scoping call, including sampling, analysis at a UKAS-accredited laboratory, travel and the report. See our guide to what affects the cost.

How quickly can you survey a North West site?

For most sites in the North West we can usually be on site within 2 to 3 weeks of a confirmed booking, with sampling carried out over a representative period of the working shift. Filters are sent to a UKAS-accredited laboratory, and the draft report is ready for issue within 10 working days of receipt of the laboratory results.

Do you cover the North West for COSHH wood dust and silica monitoring specifically?

Yes. Wood dust (inhalable WEL 3 mg/m³ for hardwood and for mixed hardwood and softwood dust, 5 mg/m³ for softwood) and respirable crystalline silica (WEL 0.1 mg/m³) are two of the most commonly monitored substances on North West sites — particularly in joineries, kitchen-fitter workshops, stone masonries, engineered-quartz worktop fabricators, and any construction or demolition site cutting concrete or brick. Inhalable and respirable sampling can be combined in the same survey.

Need workplace dust monitoring in the North West?

Tell us your processes, the number of workers and your site postcode — we'll send back a fixed-fee quote within 24 hours. We work right across the UK.

Get a Free Quote Call Us