Workplace Dust Monitoring in Wandsworth
UKAS-accredited COSHH air sampling for Wandsworth workplaces. Personal IOM-head inhalable and cyclone respirable methods, analysed at a UKAS-accredited laboratory. Chartered consultants covering South-West London.
COSHH dust monitoring for Wandsworth employers
Wandsworth has a broad industrial and construction economy. Every workplace generating airborne dust has a legal duty under COSHH Regulation 10 to measure worker exposure to airborne hazardous substances and to compare the result to the Workplace Exposure Limits in HSE document EH40.
HSE London regularly inspects joineries, food premises and metal fabrication workshops across South-West London. We provide UKAS-accredited personal IOM-head inhalable and cyclone respirable sampling for Wandsworth employers, plus direct-reading gas monitoring where relevant.
At Air Dust Odour we carry out personal breathing-zone sampling and fixed static monitoring across South-West London. Filters are sent to a UKAS-accredited laboratory and every result is compared to the relevant Workplace Exposure Limit in HSE document EH40. Surveys are planned and signed off by Malcolm Pounder CEnv MIAQM, a Chartered Environmentalist with two decades of hands-on air-quality experience.
Our Wandsworth Dust Monitoring Services
Every survey uses the correct sampling head per HSE methodology and is analysed by a UKAS-accredited laboratory.
Wood Dust Monitoring (IOM head)
Personal sampling of hardwood and softwood dust at Wandsworth joineries, sawmills, kitchen-fitter workshops and on-site carpentry. WEL 3 mg/m³ 8-hr TWA — one of the lowest dust limits in EH40 and frequently exceeded.
Inhalable & Respirable Dust
IOM-head inhalable and Higgins-Dewell cyclone respirable sampling for the general WELs (10 and 4 mg/m³). Routinely used at Wandsworth engineering workshops, joineries, food manufacturers and construction sites.
Respirable Crystalline Silica
Cyclone sampling per MDHS 101 with UKAS-accredited XRD analysis. WEL 0.1 mg/m³ — critical for Wandsworth stonemasons, engineered-quartz worktop fabricators, concrete cutters and quarrying operations.
Flour, Grain & Food Dusts
Inhalable food dusts including flour (WEL 10 mg/m³) and grain (WEL 10 mg/m³). Important for Wandsworth bakeries, food manufacturers, animal-feed mills and grain stores.
Gas & Indoor Air Quality (CO, CO&sub2;, VOCs)
Direct-reading multi-gas monitoring for Wandsworth offices, schools, plant rooms, underground car parks, confined space and construction sites. Calibrated electrochemical, NDIR and PID sensors for carbon monoxide, carbon dioxide, total VOCs, NO&sub2;, H&sub2;S, O&sub2; and LEL against EH40 WELs and BREEAM Hea 02 benchmarks.
Wandsworth & Surrounding Areas
We cover Wandsworth and the wider South-West London, with no per-mile travel surcharges.
Frequently Asked Questions
Do I need workplace exposure monitoring in Wandsworth?
If your Wandsworth site generates dust, fume or vapour from processes such as engineering, joinery, food production, construction or stone and concrete cutting, you have a legal duty under COSHH Regulation 10 to assess and control worker exposure. Where there is no obviously low-risk exposure, monitoring with personal sampling pumps is normally the only defensible way to demonstrate compliance with the relevant Workplace Exposure Limit in HSE document EH40. Wandsworth sits within HSE London HSE jurisdiction, and inspectors increasingly expect to see recent, UKAS-analysed personal sampling data on file.
Which industries in Wandsworth most commonly need dust monitoring?
Wandsworth's economy spans construction, the Battersea / Nine Elms regeneration, prime residential, hospitality and joinery. The most commonly monitored substances are wood dust in joineries (WEL 3 mg/m³), respirable crystalline silica in stonework and concrete cutting (WEL 0.1 mg/m³), inhalable mixed dust in light manufacturing, and welding fume in metal fabrication (HSE Group 1 carcinogen since 2019).
How much does a workplace dust survey cost in Wandsworth?
A typical baseline survey for Wandsworth covering 4 to 8 workers with personal IOM-head sampling starts from around £750 to £1,200 plus VAT, with UKAS laboratory analysis at a UKAS-accredited laboratory charged at £35 to £85 per filter depending on the analyte. Travel from our base is included in the quoted fee — no per-mile surprises. See our cost breakdown page for worked examples across different industries and survey sizes.
How quickly can you survey a Wandsworth site?
For most Wandsworth sites we can usually be on site within 2 to 3 weeks of a confirmed booking, with sampling carried out over a full representative shift. Filters are dispatched same-day to a UKAS-accredited laboratory; results typically take 5 to 10 working days, and the written report follows within a further week. Where HSE has issued an Improvement Notice we can usually expedite the visit.
Do you cover Wandsworth for COSHH wood dust and silica monitoring specifically?
Yes. Wood dust (hardwood and softwood, WEL 3 mg/m³ inhalable) and respirable crystalline silica (WEL 0.1 mg/m³) are two of the most commonly monitored substances on Wandsworth sites — particularly in joineries, kitchen-fitter workshops, stone masonries, engineered-quartz worktop fabricators, and any construction or demolition site cutting concrete or brick. We carry both IOM heads and Higgins-Dewell cyclones on every visit and can combine the two sampling regimes on the same shift.